Auto Air Conditioner (24VDC) (DL-1800)

In case you are on your way to bed and wish to avoid the nightmares, you better postpone reading this article until morning. But in case you are about to drive, please read on.

Please read on

While the meaning of Black Death has changed from being the deadly plague in the fourteenth century, a vehicle’s air conditioning system that experiences this condition can be infected. This condition begins outside the compressor due to the breakdown of the refrigerant. Since the refrigerant breakdown leads to an ugly wear, the grimy and sharp metal particles that are created at this time can circulate through your air conditioning system causing damage to the whole system.

Auto Air Conditioner

Several factors at play

It is sad that you feel uncomfortable due the weak airflow. The sweat is adequate to drive you crazy. However, there are several factors at play. Whether your truck has the Auto Air Conditioner (24VDC) (DL-1800) or otherwise, it is advisable to be alert always. If you realize that there is a reduction in the airflow take the necessary step: let it be checked before you run into more trouble. Major causes of a weak airflow include:

v Mildew or mold accumulation in the evaporator core. This prevents air from reaching the air vents.

v Loose hose. This normally occurs in the blower hose supplying air to your blower unit.

v Fried ventilation. In case the fan is not functioning, the airflow will be interrupted.

v Seals. The blower house seals, evaporator core case or core case seals can open up diminishing the airflow. It is important to check them as all air conditioners, including the Auto Air Conditioner (24VDC) (DL-1800) among others, have very sensitive ventilation systems and should remain sealed. If they remain open, the entire system will be compromised.

Visit your auto mechanic to have your vehicle ac fixed to be assured of the standalone air conditioning every time you are in your vehicle.

Info provided by www.BUYcarParts.co.uk

Brembo six-piston caliper

You may have thought of stripping up your automotive to discover the mysteries that are hidden in it. Stop! This should not be a point of adventure if you are not a mechanic or a vehicle repair specialist. Well, the vehicle repair experts will tell you that one of the most crucial parts in a car is the brake caliper. One of the top varieties in the market includes the Brembo six-piston caliper. Let’s take a look at some its key components:

brake caliper

Piston Seal

The piston seal is there for the purpose of keeping the brake fluid from escaping when the piston is moving in its bore. It also springs back the piston to a retracted position.

Piston Boot

The piston boot serves the purpose of keeping dirt and debris from the bores of the caliper. Subject to excessive heat –particularly in carbon ceramic applications, where the pad temperature rise to a peak of 1500 degrees- the piston boot usually has a tremendously high thermal resistance steel ring found within its manmade EPDM rubber assist to hold its shape.

Pistons

There are six of them: three for each side. They force the braking pads to touch the rotor. These pistons are small on the leading edges but grow bigger towards trailing edges to balance the force of pressure as well as the heat exerted on the brake pads. Balancing the force of pressure is very significant to the pad wear, keeping them from cracking or tapering. The uniform wear of the pad and the pressure also benefit the pedal feel. To reduce the pedal travel as well as provide the most constant feedback it is necessary that all pad areas touch the rotor at exactly the same time.

Bridge

The stiffness of the caliper is also very significant to the pedal feel. What is referred to as the bridge is actually a chunk of a casting which keeps the calipers sides from being spread open by the pressure.

Info from www.SPAREpartStore24.co.uk